Bare Surface Remover
Description
- A clear thick gel liquid
- Water washable graffiti remover for unprotected substrates
- Designed to remove both aerosol and marker pen graffiti from uncoated porous surfaces gelled for easy use on vertical areas
Instructions for use
- Hold cloth over top whilst opening
- Do not apply to sensitive material such as plastic, perspex or previously painted surfaces. If in doubt contact the technical department of Graffiti Magic limited or carry out a small trial application
- Apply a thick coat by brush - for areas of heavy graffiti apply a second coat on the top of the first coat after a few minutes
- Leave until graffiti reacts – usually between 10 and 30 minutes
- Rinse off with copious amounts of water - for best results use a power washer
- If a shadow remains then allow the surface to dry and repeat from stage 3
Coverage
Approximately 10 square meters per litre depending on porosity of surface.
Application Method
- Bare Surface Graffiti Remover should be applied using a brush
- For areas of heavy graffiti apply the second coat on the top of the first coat after a few minutes
Cleaning Tools
Clean all equipment with water immediately after use.
Designed to remove both aerosol and marker pen graffiti from uncoated porous surfaces.